์˜จ๋ผ์ธ ์ฑ„ํŒ…

+8615317905991

Desktop spectrophotometer

์ œํ’ˆ ๋ฒˆํ˜ธ

๋ฉ”์‹œ์ง€๋ฅผ ๋‚จ๊ฒจ์ฃผ์„ธ์š”

=

Desktop spectrophotometer

๋ฉ”์‹œ์ง€๋ฅผ ๋‚จ๊ฒจ์ฃผ์„ธ์š”

=
์ œํ’ˆ ์„ค๋ช…

DSCD-950P Benchtop Spectrophotometer is an intelligent, convenient and high precise spectrophotometer. It adopts 7 inches touch screen, full-spectrum capability, and an Android operating system. Illumination modes include reflection D/8ยฐ and transmission D/0ยฐ (with UV inclusion/exclusion measurements). It offers accurate and stable color measurements, a large storage capacity, and robust expansion capabilities on the PC end, making it suitable for laboratory color analysis and communication.

Introduction:
- Adopts reflectance D/8ยฐ and transmittance D/0ยฐ geometry to measure both opaque and transparent materials.

QQๅ›พ็‰‡20220927145011

- Dual Optical PathsSpectrum Analysis Technology
This technology can simultaneous access to both measurement and instrument internal environmental reference data to ensure instrument accuracy and long-term stability.

QQๅ›พ็‰‡20220928143056

- Compatible with SCI/SCE measurement, Support SCI+SCE Measurement
Instrument adopts D/8 geometry which is highly recommends by CIE (International Commission on Illumination) to meet color measurement of different industries.It supports both SCI (specula component included) and SCE (specular component excluded) mode for better detect of color change.Fast SCI+SCE measurement, test time only need less than 4s.

1 1

- Rotatable Touch Screen with Android Operate System
Screen position and direction can be adjusted according to the instrument test methods.

B3XB SXRA7FP3FHHW L

Android Operate System

2 1

- Open Transmittance Measurement Area, no limit on sample size

3 1

โ€ข Different Kinds of Accessories for simple measurement
It contains 15 kinds of standard and 12 kinds of optional accessories to measure different kinds of materials

4 1

โ€ข Accessory Drawer to Protect and Store Accessories

5 2

โ€ข Switchable Reflectance Apertures

8

โ€ข Four Kinds of UV Test Modes for Fluorescence Material Measurement

6 1

Instrument Structure Introduction

DSCD-920

์‚ฌ์–‘:

Illumination/ Viewing System

Reflection: d/8(Diffused illumination, 8 degree viewing)

Simultaneous measurement of SCI/SCE (ISO7724/1, CIE No.15, ASTM E1164, ASTM-D1003-07, DIN5033 Teil7, JIS Z8722 Condition C standard)

Transmittance d/0(Diffused illumination, 0 degree viewing )

Sensor Silicon Photodiode Array
Grating Method Concave Grating
Sphere Diameter 152mm
ํŒŒ์žฅ 360-780nm
Wavelength Pitch 10nm
Half Band Width 5nm
Reflectance Range

ํ•ด๊ฒฐ

0-200%

0.01%

Light Source Pulse Xenon Lamp and LED
UV Measurement Include UV, 400nm, 420nm, 460nm
Measurement Time SCI/SCE < 2s

SCI+SCE < 4s

Measurement Aperture Reflection:
XLAV ฮฆ25.4mm/ฮฆ30mm
LAVฮฆ15mm/ฮฆ18mm
MAVฮฆ8mm/ฮฆ11mm
SAVฮฆ3mm/ฮฆ6mm
(Users can customize the caliber, and the caliber switch will be automatically recognized)
Transmission: ฮฆ17mm/ฮฆ25mm
Transmittance Sample Size No limit on sample width and height, thickness โ‰ค50mm
Repeatability

XLAV Spectrum Reflectance/Transmittance: standard deviation within 0.1%
XLAV chromaticity value: standard deviation ฮ”E*ab within 0.015 (after instrument calibration, measure the white calibration plate 30 times at 10 second intervals)

Inter-Instrument Agreement XLAV ฮ”E*ab 0.15 (BCRA Series II, Average measurement of 12 tiles, at 23โ„ƒ)
Illuminants A, C, D50, D55, D65, D75, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, CWF, U30, DLF, NBF, TL83, TL84
Language English, Russian, Spanish, Portuguese, Japanese, Thai, Korean, German, French, Polish, Chinese (simple and traditional), Indonesian
ํ‘œ์‹œํ•˜๋‹ค Spectral data, spectral graph, colorimetric data, color difference data, color difference graph, pass/fail judgment, simulated color, color evaluation, haze, liquid color, color deviation
Viewing Angles 2ยฐ and 10ยฐ
Color Spaces L*a*b, L*C*h, Hunter Lab, Yxy, XYZ
Other Indices

WI(ASTM E313-00,ASTM E313-73,CIE/ISO, AATCC, Hunter, Taube Berger, Stensby)

YI(ASTM D1925, ASTM E313-00, ASTM E313-73), Tint(ASTM E313-00), Metamerism index milm, stain fastness, color fastness, ISO brightness, R457, A density, T density, E density, M Density, APHA/Pt-Co/Hazen, Gardner, Saybolt, ASTM color, Haze, Total Transmittance, Opacity, Color Strength

Color Difference ฮ”E*ab, ฮ”E*CH, ฮ”E*uv, ฮ”E*cmc, ฮ”E*94, ฮ”E*00, ฮ”E*ab(hunter),555 shade sort
Storage Memory 8 GB U Disk for data storage and transfer
Screen Size 7 Inches Touch Screen
ํž˜ 12V/3A
Operate Temperature 5-40โ„ƒ(40-104F), relative humidity 80% (at 35โ„ƒ) no condensation
Storage Temperature -20-45โ„ƒ(-4-113F), relative humidity 80% (at 35โ„ƒ) no condensation
Accessories

Power adapter, data cable, transmission fixture, USB flash drive (including management software), black chamber, white board, green board, 0% calibration light shielding cover, 30 mm aperture plate, 18 mm aperture plate, 11 mm aperture plate, 6 mm aperture plate, support table, cuvette, damping handle

Optional Accessories

Heating Fixture for Transmittance, Vertical Support and Pneumatic ram for downward measurement, Reflectance fixture for small size sample, Reflectance Glass Cell Support, Corrosion-Resistant Protective Plate (non-removable), Sample Holder for Fiber, Film Fixture, Transmittance Fixture for Small Aperture, Trolley Case, European Standard Plug, American Standard Plug

์ธํ„ฐํŽ˜์ด์Šค USB, USB-B and RS-232
Instrument Size 465x240x260mm(L*W*H)
๋ฌด๊ฒŒ 10.8KGS
Other Function

1. Camera to view measurement area;

2. Support horizontal, vertical and downward measurement method (need optional accessories to support for downward measurement);

3. Auto humidity and temperature compensation function.

ํ‘œ์ค€:
ISO 7724-1 โ€œPaints and varnishes โ€” Colorimetryโ€
CIE No.15 โ€œColorimetryโ€
ASTM E1164 โ€œStandard Practice for Obtaining Spectrometric Data for Object-Color Evaluationโ€
ASTM D1003 โ€œStandard Test Method for Haze and Luminous Transmittance of Transparent Plasticsโ€
DIN 5033-7 โ€œColorimetry; measuring conditions for object coloursโ€
ASTM E313 โ€œStandard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinatesโ€
ASTM D1925 โ€œTest Method for Yellowness Index of Plasticsโ€
JIS Z8722

Applications:
โ€ข Plastic Plate Color Measurement

1 3

Plastic Plate Color Measurement

โ€ข Powder Material Color Measurement

2 4

Powder Material Color Measurement

โ€ข Petroleum and Oil Color and Transmittance Measurement

3 3

Petroleum and Oil test

โ€ข Textile and Yarn Color Measurement

4 2

Textile and Yarn Color Measurement

โ€ข Master Batches and other Pellet Material Color Measurement

5 3

Master Batches and other Pellet Material Color Measurement

โ€ข Printing Ink and Packing Material Color Measurement

6 2

Master Batches and other Pellet Material Color Measurement