IEC61032:1997 Test Probe D IP4X Test Wire 1.0 mm

Temel Giriş:
1. According to: GB/T4208-2008 / IEC61032:1997 / IEC60529:2001 / IEC60065 / IEC60598 and UL
2. IP4X Test Probu D (Test Probu D), ev ve benzeri elektrikli cihazların elektrik çarpmasına karşı koruma testini gerçekleştirmek için gerekli bir araçtır.

Teknik parametreler:
1. Kablo uzunluğu: 100 mm
2. Tel çapı: 1,0 mm
3. Dairesel bölme çapı: 35 mm
4. Sap çapı: 10 mm
5. Sap uzunluğu: 100 mm
6. IEC61032 şekil 4'e göre (Test probu D).
7. İtme Kuvveti: 1N

Uygulama:
1. Standard test refers to the joint part can’t touch the live parts or close to the dangerous parts. and 35mm circular baffle can not be enter.
2. In the test requirement for preventing access to the hazardous parts. Test Probe D need to be with push force 1¡À0.1N

Purpose:
This probe is intended to verify the basic protection against access to hazardous parts. It’s also used to verify the protection against access with a tool.

Not:
For without thrust products, please use with the push tension dynamometer.