IEC61032:1997 Test Probe D IP4X Test Rod 1.0 mm

Temel Giriş:
1. According to: GB/T4208-2008 / IEC61032:1997 / IEC60529:2001 / IEC60065 / IEC60598 and UL
2. IP4X Test Probu D (Test Probu D), ev ve benzeri elektrikli cihazların elektrik çarpmasına karşı koruma testini gerçekleştirmek için gerekli bir araçtır.

NOTE: Please note SMT-1204 is without cable. If you want to test with Low-voltage Test Supply LISUN model is SMT-529CV, you may choose SMT-1204C with cables.

Technical Parameter:
1. Test rod length: 100 mm
2. Test rod diameter: 1.0 mm
3. Dairesel bölme çapı: 35 mm
4. Sap çapı: 10 mm
5. Sap uzunluğu: 100 mm
6. IEC61032 şekil 4'e göre (Test probu D).

Uygulama:
1. Standard test refers to the joint part can’t touch the live parts or close to the dangerous parts. and 35mm circular baffle can not be enter.
2. In the test requirement for preventing access to the hazardous parts. Test Probe D need to be with push force 1±0.1N.

Purpose:
This probe is intended to verify the basic protection against access to hazardous parts. It’s also used to verify the protection against access with a tool.

Not:
For products without thrust, please use with a push-pull force gauge.

Standart:
IEC 61032 “Protection of persons and equipment by enclosures – Probes for verification”
IEC 60529 "Muhafazalar tarafından sağlanan koruma dereceleri (IP Kodu)"
IEC 60065 “Audio, video and similar electronic apparatus – Safety requirements”
IEC 60598-1 “Luminaires – Part 1: General requirements and tests”
UL, GB/T 4208