According to the requirement of IEC standards, the standard test temperature is 25℃. But high power lamps such as HID lamps and LED outdoor luminaires will produce a lot of heat during the test, thus the temperature inside the integrating sphere can not meet the requirement of IEC standards. LISUN designed the Constant Temperature 적분구 (thermostatic sphere or temperature controlled integrating sphere) which keeps the temperature inside of the sphere stable at 25℃.

LISUN IS-*MT Constant Temperature Integrating Sphere is fully meet IES LM-82 Clause 4.4.

사양:
• Diameter: IS-1.5MT (1.5m), IS-1.75MT (Φ1.75m), IS-2.0MT (Φ2.0m). PS: Other big size can be designed according to the customer’s requirements.
• Painting material of integrating spheres is according to CIE Pub.No.84 (1989)
• The internal BaSO4 coating: ρ (λ) ≥0.96 (450nm~800nm) and ρ (λ) ≥0.92 (380nm~450nm)
• 미세 확산 반사: 반사율 ρ≈0.8 및 정확도 ρ(λ) <1.5%
- 모든 기능 램프 테스트 지그 내장: E27, T5/T8/T12 튜브 및 LED 및 기타 조명기구용 테스트 홀더 베이스. 테스트 중인 모든 샘플을 구의 위쪽 및 아래쪽 방향으로 설치할 수 있습니다.
• Power cable, power terminal and auxiliary lamp position are built-in (Auxiliary lamp is optional).
• Power cable and socket are build-in. It is convenient to power on the lamp under test
- Two 사진 감지기 포트, 하나 광섬유 포트 1개와 온도 센서 포트 1개가 내장되어 있습니다.
• Constant temperature range: 25℃-55℃ (The reference ambient temperature is 25°C): Temperature rise tolerance: ±1℃ and temperature drop tolerance: ±2℃
• 내장형 크로스 레이저는 적분구 중앙에 표준 램프와 테스트 대상 램프를 설치하는 데 도움이 됩니다. (이 항목은 직경이 1m 이하인 적분구에는 포함되지 않습니다.)

애플리케이션:
적분구는 다음과 같이 작동합니다. 분광방사계 to do the photometric, colorimetric and electrical parameters measurement:
• IS-0.3M/IS-0.5M is for LEDs, LED modules, mini LED bulbs & other small lamps. The flux testing range is 0.001 to 1,999 lm.
• IS-1.0MT is for CFL or LED bulbs. The flux testing range is 0.1 to 199,990 lm.
• IS-1.5MT/IS-1.75MT is for CFL, LED bulb and tube, fluorescent lamp, CCFL. The flux testing range is 0.1 to 1,999,900 lm.
• IS-2.0MT is for HID lamps or high power lamps. The flux testing range is 0.1 to 1,999,900 lm