{"id":2484,"date":"2025-06-19T19:36:10","date_gmt":"2025-06-19T11:36:10","guid":{"rendered":"https:\/\/www.ledphotometer.com\/blog\/salt-spray-test-salt-spray-test-chamber\/"},"modified":"2025-07-03T14:30:11","modified_gmt":"2025-07-03T06:30:11","slug":"salt-spray-test-salt-spray-test-chamber","status":"publish","type":"post","link":"https:\/\/www.ledtestsystem.com\/es\/productos\/salt-spray-test-salt-spray-test-chamber\/","title":{"rendered":"IEC60068-2-11 Pruebas de niebla salina"},"content":{"rendered":"

Salt Spray Test Chamber | Salt Fog Test | ASTM B117 Salt Spray ChamberSalt Spray Test Chamber<\/strong> is applicable to the salt spray corrosive test for the protection layer of components, parts, electronic and electrical parts and metal materials and industrial products. Salt spray test chamber is to assess the corrsion resistance of materials and coatings. This type of test is important for various industries to ensure the durability and reliability of products, especially those exposed to harsh environmental conditions, such as marine environmentals, automotives settings, or industrial applications.<\/p>\n

Stanndard<\/strong>:
\nGB\/T 2423.17 \u201cEnvironmental testing for electric and electronic products \u2013 Part 2: Test methods \u2013 Test Ka: Salt mist\u201d
\nIEC 60068-2-11<\/a> \u201cEnvironmental testing \u2013 Part 2-11: Tests \u2013 Test Ka: Salt mist\u201d
\nGB\/T 10125<\/a> \u201cCorrosion tests in artificial atmospheres \u2014 Salt spray tests\u201d
\nGB\/T 1771 \u201cPaints and varnishes \u2013 Determination of resistance to neutral salt spray(fog)\u201d
\nASTM-B117<\/a> \u201cStandard Practice for Operating Salt Spray (Fog) Apparatus\u201d
\nQBT 3826<\/a> \u201cCorrosion-resistant testing method of the metal deposits and conversion coatings for the light industrial products.Neutral salt spraying test (NSS)\u201d
\nQBT 3827<\/a> \u201cCorrosion-resistant testing method of the metal deposits and conversion coatings for the light industrial products\u2013Acetic salt spraying test (ASS)\u201d
\nIEC 60068-2-52 \u201cEnvironmental testing \u2013 Part 2-52: Tests \u2013 Test Kb: Salt mist, cyclic (sodium chloride solution)\u201d
\nASTM-B368 \u201cStandard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)\u201d
\nMIL-STD-202 \u201cDEPARTMENT OF DEFENSE TEST METHOD STANDARD ELECTRONIC AND ELECTRICAL COMPONENT PARTS \u201c
\nEIA-364-26 \u201cSalt Spray Testing of Electrical Connectors\u201d
\nGJB150 \u201cEnvironmental Test Methods for Military Equipments\u201d
\nISO3768 \u201cMetallic coatings Neutral salt spray test (NSS test)\u201d
\nISO3769 \u201cMetallic coatings Acetic acid salt spray test (ASS test)\u201d
\nISO3770 \u201cMetallic coatings Copper-accelerated acetic acid salt spray test (CASS test)\u201d
\nISO9227<\/a> \u201cCorrosion tests in artificial atmospheres Salt spray tests\u201d
\nISO 16750-4 \u201cRoad vehicles \u2013 Environmental conditions and testing for electrical and electronic equipment \u2013 Part 4: Climatic loads\u201d
\nCNS 3627 \u201cBasic Environmental Testing Procedures Part 2:Tests,Test Ka:Salt Mist\u201d
\nCNS 3885 \u201cMethod of Test for Surface Treatment of Bicycle Parts\u201d
\nCNS 4159 \u201cMethod of Copper-Accelerated Acetic Acid Salt Spray (Fog) Test for Surface Finishing (CASS Test)\u201d
\nCNS 7669 \u201cGeneral Rules of Electroplating for Automobile Parts\u201d<\/p>\n

Specification:<\/strong><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
LISUN Model<\/td>\nYWX\/Q-150<\/td>\nYWX\/Q-250<\/td>\nYWX\/Q-750<\/td>\nYWX\/Q-010<\/td>\nYWX\/Q-016<\/td>\nYWX\/Q-020<\/td>\n<\/tr>\n
Working room size<\/td>\n600*450*400<\/td>\n900*600*500<\/td>\n1100*750*500<\/td>\n1200*800*500<\/td>\n1600*1000*600<\/td>\n2000*1000*600<\/td>\n<\/tr>\n
External dimensions<\/td>\n1100*670*1050<\/td>\n1410*900*1050<\/td>\n1600*1050*1200<\/td>\n1700*1150*1200<\/td>\n2300*1250*1450<\/td>\n2800*1350*1450<\/td>\n<\/tr>\n
Capacity<\/td>\n108L<\/td>\n270L<\/td>\n412L<\/td>\n480L<\/td>\n960L<\/td>\n1200L<\/td>\n<\/tr>\n
Solution tank volume<\/td>\n15L<\/td>\n25L<\/td>\n30L<\/td>\n32L<\/td>\n40L<\/td>\n45L<\/td>\n<\/tr>\n
Working power<\/td>\nSingle -phase AC 220V\/50Hz (60Hz available)<\/td>\nThree -phase AC 380V\/50Hz (60Hz available)<\/td>\n<\/tr>\n
1.5KW<\/td>\n2.0KW<\/td>\n2.5KW<\/td>\n2.5KW<\/td>\n5.0KW<\/td>\n6.0KW<\/td>\n<\/tr>\n
Sample space available<\/td>\n500*300*250<\/td>\n800*450*250<\/td>\n900*600*300<\/td>\n1000*600*300<\/td>\n1400*800*350<\/td>\n1800*800*350<\/td>\n<\/tr>\n
Opening Method<\/td>\nManual control<\/td>\nManual control<\/td>\nManual control<\/td>\nStainless steel air spring support<\/td>\nCylinder support<\/td>\nCylinder support<\/td>\n<\/tr>\n
Working temperature<\/td>\nRoom temperature ~+55 \u2103<\/td>\n<\/tr>\n
The temperature range of saturated barrel<\/td>\nRoom temperature ~+70 \u00b0 C (Heating and filtering compressed air to reduce nozzle crystallization)<\/td>\n<\/tr>\n
Temperature performance<\/td>\nTemperature uniformity: \u22642 \u2103\u00a0\u00a0\u00a0\u00a0\u00a0 Temperature volatility: \u2264 \u00b1 0.5 \u2103<\/td>\n<\/tr>\n
Salt spray deposition rate<\/td>\n1-2ml\/80cmm\/h (take average of 16-hour test )<\/td>\n<\/tr>\n
Spray method<\/td>\nContinuous, intermittent, programmable test<\/td>\n<\/tr>\n
Test type<\/td>\nNeutral test (NSS), acid test (AASS), copper acceleration salt fog test (CASS)<\/td>\n<\/tr>\n
Safety protection mechanism<\/td>\nLow water level alarm, over-temperature alarm (mechanical over-temperature protection + electronic over-temperature protection dual over-temperature protection), low air pressure alarm<\/td>\n<\/tr>\n
Requirements for air compressors<\/td>\nPrepared by the customer: air inlet pressure 0.4Mp or above, two-stage pressure regulation, spray pressure 0.07~0.17Mp (adjustable)<\/td>\n<\/tr>\n
Sample rack<\/td>\nOne set of V -shaped grooves and O -type round sticks (combined with an angle of 20 \u00b0 \u00b1 5 \u00b0). Special sample racks can be ustomized, and the load-bearing capacity is configured according to actual conditions.<\/td>\n<\/tr>\n
Standard accessories<\/td>\n1 set of V -type\/O -type sample racks, 2 bottles of sodium chloride (500g\/bottle), 1 plastic rust -proof barrel (5L), 1 nozzle<\/td>\n<\/tr>\n
Working environment requirements<\/td>\nThe ambient temperature is 5\u2103~30\u2103. Ventilation is recommended. When the temperature exceeds 30\u2103, it is recommended to adjust the room temperature through appropriate methods. The ambient humidity is below 80%Rh.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Optional suggestions<\/strong>: When using LISUN YWX\/Q-010 salt spray test chamber, it is necessary to choose a LISUN LS-EU800W2-55L air compressor (power 800W*2, capacity 55L, speed 1380r\/min, pressure 0.7Mpa, flow 120L\/m in, 220~240V\/50Hz) or LS-US800W2-55L air compressor (power 800W*2, capacity 55L, speed 1380r\/min, pressure 0.7Mpa, flow 120L\/min, 110~120V\/60Hz).<\/p>\n

\n

\"\"<\/p>\n

LS-EU800W2-55L Air Compressor<\/span><\/p>\n<\/div>\n

Product Features<\/strong>:<\/p>\n

\n

\"\"<\/p>\n

Products Features<\/span><\/p>\n<\/div>\n

What is salt spray corrosion?<\/a><\/strong><\/h2>\n

Corrosion is the destruction or deterioration of materials or their properties caused by the environment. Most corrosion occurs in the atmospheric environment, which contains corrosive components and factors such as oxygen, humidity, temperature changes, and pollutants. Salt spray corrosion is a common and most destructive atmospheric corrosion. The salt spray mentioned here refers to the chloride atmosphere, and its main corrosive component is the chloride salt in the ocean \u2013 sodium chloride, which mainly comes from the ocean and inland saline-alkali areas. The corrosion of the surface of metal materials by salt spray is caused by the chloride ions contained in it penetrating the oxide layer and protective layer on the metal surface and electrochemically reacting with the internal metal. At the same time, chloride ions contain a certain amount of hydration energy and are easily squeezed out by the pores and cracks adsorbed on the metal surface and replace the oxygen in the oxide layer, turning insoluble oxides into soluble chlorides and turning the passive surface into an active surface, thus it causing extremely bad adverse reactions to the product.<\/p>\n

How do you do a salt spray test?<\/a><\/strong><\/h2>\n

1. First power on the salt spray test chamber<\/a>\u00a0(plug in)
\n2. Press the red power switch panel from left to right, respectively: the low water level A light is on, the low salt water B light is on, and the low water level C light is on.
\n3. Pour distilled water directly into the test chamber, wait until the water level A indicator light off, and stop adding water. [\u2026more\u2026<\/a>]<\/p>\n

How Long does a Salt Spray Test Take?<\/a><\/strong><\/h2>\n

The Salt Spray Test Chamber is an environmental test equipment that evaluates the corrosion resistance of products or metal materials by artificially simulating salt spray environmental conditions. The chloride concentration in the salt spray environment can be several or tens of times the salt spray content of the general natural environment, which greatly increases the corrosion rate. The salt spray testing<\/strong>\u00a0<\/a>of the product can greatly shorten the time to obtain the result. For example, if a product is tested in a natural exposure environment, it may take 1 year for its corrosion, while a test in salt spray test chamber may take as long as 24 hours to obtain similar results.<\/p>\n

How to use a salt spray test chamber to determine the corrosion resistance of LED lamps?<\/a><\/strong><\/h2>\n

Salt spray test is a kind of environmental reliability test, mainly used to test the corrosion resistance of metal materials of lamps. In order to verify whether the metal parts on the product will corrode when exposed to the atmosphere or other environments, the product can be placed in the use environment for a long enough time, such as a product life cycle. This is time-consuming and labor-intensive. In practice, it is rarely used, so a convenient method is needed to evaluate the corrosion resistance of the product.<\/p>\n

<\/i> \"video\"<\/div>\n

LISUN YWX\/Q-010 Salt Spray Test | Salt Spary Chamber \u2013 After-sales Frequently Asked Questions (FAQ)<\/span><\/a>
\n<\/strong>LISUN YWX\/Q-010 Salt Spray Test | Salt Spary Chamber were in the market for more than 10 years, LISUN engineers service team already summary the most of the After Sales Questions and Answers in the above link. Please read it carefuly, you can solve the most of the problems by yourself if you have some questions while using the instruments. LISUN will be continue to update this pages and more FAQ can be found in this topic link.<\/p>\n","protected":false},"excerpt":{"rendered":"

Salt Spray Test Chamber | Salt Fog Test | ASTM B117 Salt Spray ChamberSalt Spray Test Chamber is applicable to the salt spray corrosive test for the protection layer of components, parts, electronic and electrical parts and metal materials and industrial products. Salt spray test chamber is to assess the corrsion resistance of materials and […]<\/p>\n","protected":false},"author":1,"featured_media":3773,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[6],"tags":[238],"class_list":["post-2484","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-products","tag-ywx-q-010"],"_links":{"self":[{"href":"https:\/\/www.ledtestsystem.com\/es\/wp-json\/wp\/v2\/posts\/2484","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.ledtestsystem.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.ledtestsystem.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.ledtestsystem.com\/es\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.ledtestsystem.com\/es\/wp-json\/wp\/v2\/comments?post=2484"}],"version-history":[{"count":0,"href":"https:\/\/www.ledtestsystem.com\/es\/wp-json\/wp\/v2\/posts\/2484\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.ledtestsystem.com\/es\/wp-json\/wp\/v2\/media\/3773"}],"wp:attachment":[{"href":"https:\/\/www.ledtestsystem.com\/es\/wp-json\/wp\/v2\/media?parent=2484"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.ledtestsystem.com\/es\/wp-json\/wp\/v2\/categories?post=2484"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.ledtestsystem.com\/es\/wp-json\/wp\/v2\/tags?post=2484"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}