logo

Chat en línea

+8615317905991

Todas las categorías

Common Mode Inductor Balance Tester

N.º de producto:

Dejar un mensaje

=

Common Mode Inductor Balance Tester

Dejar un mensaje

=
Productos relacionados
Descripción del Producto

Common mode inductor balance tester is also called filter balance tester. It is suitable for all kinds of common mode inductors, filter common mode inductors Ls, DCR balance measurement. Its measuring accuracy is up to 0.1% and it can meet the measurement requirements of production line quality assurance, incoming inspection and component design and evaluation. Equipped with a more comprehensive communication and control interface, the connection of automation equipment is simple and convenient.

The following are product models and differences, please purchase according to your needs:
• LS7575BN: Maximum frequency 10KHz, 4.3 “LCD 2U standard case
• LS1085CX: Test frequency 50-200kHz, DCR test function, standard test box, balance fixture
• LS8517CX-4PA: 2 pairs of winding test with frequency 50-200kHz, can simultaneously test Ls, DCR, cycle ratio, balance function
• LS8517CX-6PA: 3 pairs of winding test with frequency 50-200kHz, can simultaneously test Ls, DCR, cycle ratio, balance function

Modelo LS7575BN LS1085CX LS8517CX
Frecuencia de la prueba

 

 100Hz, 120Hz, 1kHz, 10kHz 50Hz～200kHz,

42 typical frequency points

 50Hz ～ 200kHz,

37 typical frequency points
Test parameter L, Q, R L, C, R, Q, |Z|, DCR L, R, Q, |Z|, θ(RAD), C, DCR
Test level 0.1Vrms, 0.3Vrms, 1Vrms 10mV～1Vrms 50mV-2.0V, Continuously adjustable
Basic accuracy 0.1%, Accuracy table shall prevail 0.05%, Accuracy table shall prevail
Display

range

 

 

 

 

 |Z| – 0.1 mΩ～99.999MΩ 0.1 mΩ～99.999MΩ
L 0.0001μH～999.99H 0.0001μH～9999.9H 0.0001μH～999.99H/ 0.0001μH～9999.9H
R 0.01 mΩ～99.999MΩ 0.1 mΩ～99.999MΩ 0.01 mΩ～99.999MΩ
Q 0.0001～9999 0.0001～99999 0.1～9999.9
θ(RAD) – -3.14159～3.14159
θ(DEG) – -179.99 o ～179.99o
Δ% – -99.999%～99.999%
DCR – 0.1 mΩ～99.999MΩ 0.01mΩ-99.9999MΩ
Velocidad de prueba

 

 Fast speed: 30 times/second,

medium speed: 6 times/second,

slow speed: 1.5 times/second

 Fast speed: 50 times/second,

medium speed: 20 times/second,

slow speed: 6 times/second
Source impedance 30Ω, 100Ω 30Ω, 50Ω, 100Ω, 10/100Ω
Modo de alcance Automatic and hold
Modo de disparo

 

 Internal, manual, external Interno, manual, automático, externo, bus
Calibration function Open/short circuit, full frequency clear zero
Equivalent circuit Series and parallel
Comparador

 

 BIN0～BIN3, NG, Pass, Fail PASS, HI, LOW(PASS/FAILLED)
PASS, HI, LOW(PASS/FAILLED), Buzzer  
Ports RS232C, UsbHost, USB Device, Handler
Memorizador – 50 grupos internos, 500 grupos de archivos en disco U externo
Temperatura de trabajo

humidity

 0℃～40℃, Humedad relativa≤75%
Potencia de trabajo 100～120 V AC/198～242 V AC, 46～64 Hz, Power >50 VA
Volumen (Ancho x Alto x Profundidad) 310mmx110mmx315mm
Peso neto 2.5Kg 5.5Kg